Construction Calculators

Calculate concrete for slabs, columns, and footings in cubic yards, cubic feet, and bag count.

Estimate concrete for round, square, or continuous wall footings with depth and diameter inputs.

Estimate the total weight of reinforcing steel bars by size, quantity, and length.

Calculate asphalt mix required for a paving area by thickness and compacted density.

Estimate cut and fill volumes for grading and earthwork using the average end area method.

Convert between percent grade, degree angle, and rise-over-run for any slope or drainage application.

Calculate crushed stone, pea gravel, or aggregate in cubic yards, tons, and bags for driveways and base layers.

Estimate sand, paver base, road base, or DGA in cubic yards, tons, and bag count with 10% waste factor.

Calculate excavation volume, backfill needed, spoil haul-off, and truck loads for utility and drainage trenches.

Convert bank, loose, and compacted soil volumes using swell and shrink factors for earthwork calculations.

Estimate block count, cap blocks, courses, and deadman anchors for standard, large, or natural stone retaining walls.

Calculate roofing squares, shingles, underlayment, and ridge cap for any roof pitch and area.

Calculate stair risers, treads, stringer length, and tread board count for code-compliant stairs.

Estimate decking boards, joists, posts, and hardware for wood or composite deck construction.

Calculate stud count, top and bottom plates, headers, and sheathing sheets for framed walls.

Estimate posts, rails, pickets, and concrete for wood privacy, picket, split rail, or chain link fences.

Calculate drywall sheet count, joint compound, tape, and screws for walls and ceilings by room dimensions.

Estimate gallons of paint needed for walls, ceilings, or exterior surfaces by area and number of coats.

Calculate tile count, boxes, grout, and adhesive for ceramic tile, LVP, hardwood, laminate, or carpet.